Google Ads for carpenters in France: cost per client in 2026

Optimization and managementNovember 4, 2026 · 12 min read
Alexis
By AlexisFounder of Pulzeo
Google Ads for carpenters in France: cost per client in 2026

Across ten carpentry queries pulled in France, the bid to reach the top of the page runs from €1.02 at the low end to €3.79 at the high end, as medians. That's one of the cheapest clicks in the building trades, nearly three times less than a roofer's, and the first piece of good news if you run Google Ads for carpenters in France.

The second one needs more attention. That median hides two trades. On wardrobes, bookcases or staircases, the click stays under €4. As soon as windows come in, it climbs to between €6 and €10, because you're no longer alone on the results page.

What a click costs for a carpenter

Pulled on November 4, 2026 from Keyword Planner, location France, Search Network with partners. The queries are French, translated here. Volume is the monthly average over a year. The two amounts are the Top of page bid range Google estimates: what you have to offer, not what you'll pay.

Keyword (translated)Searches / monthLow bidHigh bid
carpenter40,500€0.88€3.31
carpenter near me22,200€0.70€3.10
carpentry tradesman2,400€0.73€2.77
carpentry company2,400€0.98€3.67
custom carpenter1,600€1.05€3.91
window installer1,600€1.76€7.36
window carpenter1,300€1.69€7.50
window replacement1,300€1.62€9.72
carpenter quote590€2.13€10.69
staircase carpenter480€0.94€3.56

The median high bid comes to €3.79, the median low bid to €1.02. Your actual click will usually land in that range, with no guarantee, and only your account will tell you where, after two or three weeks of running ads.

Now read the table from the bottom. “carpenter quote” only gets 590 searches a month, yet it's the most expensive query in the data, at €10.69. It's typed by someone who has already decided to have the work done and is comparing prices. Advertisers know it, and they pay to be seen at that moment.

To compare this trade with the others, all measured again on the same day, check the price of a Google Ads click, trade by trade.

Why “window carpenter” costs twice as much as “carpenter”

The short answer: on windows, you're bidding against manufacturers and national networks, not just against the workshop in the next town.

The word “carpenter” alone tops out at €3.31, “custom carpenter” at €3.91. Add “window” and the high bid goes to €7.50. “window replacement” reaches €9.72, “custom windows” €6.28 for 6,600 searches a month.

My explanation, which holds for the whole home renovation market: these queries also interest window brands, installer networks and lead generation platforms, which buy volume across France with budgets a tradesperson doesn't have.

High bid by carpentry query, November 4, 2026 data: carpenter quote at 10.69 euros and window replacement at 9.72 euros, against 3.31 euros for carpenter and 2.12 euros for custom wardrobe

At the other end, fitted furniture queries are surprisingly calm. “custom wardrobe” is searched 14,800 times a month with a high bid of €2.12, “custom bookcase” 6,600 times at €2.59, “custom closet” 4,400 times at €2.83. Bids that low say few advertisers are fighting for the spot, and that's where a tradesperson has the most room.

As for product queries, “front door” (74,000 searches at €1.80) or “floating floor” (40,500 at €1.04), their low price says everything about the intent: the person wants to buy an item, often at a DIY store, not to have a carpenter come to the house.

What a carpentry client costs, from click to signed job

The price of a click doesn't say much on its own. What matters is how many clicks produce a job, and for a carpenter the path always goes through a quote, often through a visit to take measurements. I'll give you the calculation with stated assumptions, because no reliable industry average is published.

Let's take two clicks, one at €3 for interior fittings, the other at €8 for windows, each between the bounds of the table. Replace them with yours as soon as you have them.

First step, from click to quote request. At one request per ten clicks, each request costs you €30 in fittings and €80 in windows. Second step, from request to signed job. Someone having a wardrobe built or their windows replaced almost always asks for several quotes. At one quote in three signed, the cost of a job triples: €90 in the first case, €240 in the second.

From click to signed job in carpentry: in interior fittings, one hundred clicks at 3 euros give ten quote requests and about 90 euros per job; in windows, one hundred clicks at 8 euros give about 240 euros per job

The mechanics of this calculation are the same for every trade, I go through them in the article on choosing between organic and paid search. What's specific to carpentry is the delay. Between the click and the signature, there's the measuring visit, the costing, sometimes a wood or stain sample. Count several weeks.

Hence one tracking rule. Count the quote request and the call as conversions, but also note, in your quoting software or a simple spreadsheet, which requests become jobs, and where they came from. Without that second number, you'll never know whether your windows at €240 a job bring in more than your wardrobes at €90.

When Google Ads becomes profitable for a carpenter

The short answer: as soon as a job's margin exceeds what it cost you to win. With €90 per fittings job and €240 per window job under these assumptions, most carpentry jobs clear that bar. The real question lies elsewhere: which of the two markets you want to feed.

Custom fittings: a cheap click, and clients who compare

Wardrobes, closets under the eaves, bookcases, kitchens. The click costs little and the order is often comfortable, which makes fitted furniture the most favorable ground in the data. The trap is the neighbourhood. “ikea custom wardrobe” is searched 12,100 times a month, almost as often as “custom wardrobe” itself: a good share of the demand is after flat-pack furniture.

Your ad has to sort people before the click. Write what sets you apart from standard furniture (built in the workshop, measured at the client's home, choice of wood) and, if you can, a price range. Whoever was looking for a €300 kit won't click, and that's for the best: they would have cost you €3 for nothing.

Window installation: an expensive click, in a market others already hold

Here, each click costs two to three times more, and the results page is taken by national players with budgets far bigger than yours. A tradesperson can still win a spot, but not by buying the same generic queries they buy.

On windows, a carpenter doesn't win by bidding higher than the national networks. They win by bidding closer to home.

In practice: the town and its neighbourhoods in your keywords and ads, a short radius around the workshop, and the words that say the installation is done by the tradesperson in person, without subcontracting. My advice if you're starting out: split fittings and windows into two separate campaigns, with two budgets. Otherwise the bidding algorithm spreads the money its own way, and you won't know which of the two markets is paying for the other.

What drives the bill up in carpentry

The city weighs little in this trade, the season more, and the type of request more than anything else.

The city, from €3.03 to €4.35 at the high bid

For roofers, the high bid varied by a factor of four from one big city to another. For carpenters, the gap fits within €1.32. “carpenter Nice” goes up to €4.35, “carpenter Nantes” to €4.30, “carpenter Toulouse” to €4.18. At the other end, Strasbourg sits at €3.20 and Marseille at €3.03. Paris, at €3.76, lands in the middle of the pack.

High bid on carpenter followed by the city name, from 4.35 euros in Nice to 3.03 euros in Marseille, November 4, 2026 data

The practical consequence: in carpentry, your budget will depend far more on what you sell than on where you sell it. Still pull your own estimates before building a plan, never those of an article, this one included. Pulzeo's keyword research shows the volume and cost per click range Google gives for your city.

Spring, more than winter

The query “carpenter” was searched 60,500 times in March 2026, against 27,100 in December 2025. Demand more than doubled between the low and the peak, with no storm or emergency to explain it: it's the calendar of home projects.

Monthly searches for carpenter in France from October 2025 to September 2026: a peak of 60,500 in March, a low of 27,100 in December

The data also shows a second high point after the summer: “carpenter near me” peaks at 27,100 searches in March and in September, and drops to 14,800 in August and December. Set your budget around those two seasons, and accept easing off in summer, when demand slows and your order book is often full.

One detail that matters: a demand peak also draws your competitors, and the cost per quote can climb without anything changing on your side. Pulzeo flags when your cost per lead climbs, so you don't find out at the end of the month.

The workshop or the job site

A carpenter who builds in the workshop and an installer who works at the client's home don't buy the same clicks. “cabinetmaker carpenter” (2,400 searches) and “fitted furniture carpenter” (1,900) sit around a €2.40 high bid, while “carpentry installation” climbs to €5.85. If you do both, advertise both, but in separate ad groups.

Which keywords should a carpenter exclude?

This trade carries two traps I hadn't seen in any other episode of this series. The first is chains: a large share of searches carry the name of a chain of carpentry stores, and those people are looking for the chain itself. The second is buying a finished product, which at first glance can't be told apart from a request for a carpenter. The families to exclude from day one, according to the same data:

  • chain names, “mr menuiserie” and its variant “mister menuisier” (12,100 searches), “la boutique du menuisier” (5,400);
  • buying a finished product, “floating floor” (40,500), “front door” (74,000), “ikea custom wardrobe”, along with the words for the big DIY chains, “kit” and “cheap” if you don't sell entry-level work;
  • DIY, “laying a floating floor” (8,100) and “how to lay parquet”, typed by home improvers looking for a tutorial;
  • jobs and training, “carpentry vocational certificate” (1,900), “carpentry training” (1,600), “carpenter salary” (1,300);
  • materials you don't install, “aluminium joinery” (5,400) or “PVC joinery” (2,900) if you only work in wood.

Check your location targeting option too. The default setting, “Presence or interest”, also reaches people outside your area who show interest in it. For a tradesperson who travels thirty kilometres at most, “Presence” is almost always the right choice.

The method, with the broad match trap, is in the article on negative keywords.

What a carpenter's landing page should show

A carpentry tradesman sells a skill that can't be touched before the job. The page your ads lead to has to do what your workshop does when a client drops by: show. A page that converts has:

  • photos of your work, before and after, with the wood species and the town, never stock images;
  • your phone number at the top of the page, tappable on mobile;
  • your service area, town by town, and the average delay between the visit and the installation;
  • the promise of a written quote after measuring, and how soon you send it.

With a €3 click in fittings and up to €10 on a window quote, every visitor who leaves without seeing a single piece of your work has cost you the price of an oak board for nothing.

What Google Ads budget should a carpenter plan for

Start from a number of jobs, never from a round amount.

A carpenter aiming for four fittings jobs a month, with a €3 click, one quote request for every ten clicks and one quote in three signed, needs twelve requests, or about 120 clicks and €360 a month. The same goal on window installation, with an €8 click, gets close to €960. If your actual click gets close to the high bid for “window replacement”, €9.72, count on more than €1,150.

Add a margin for March and September, and a month of patience at the start, while the first quotes get signed. The budget logic common to every trade is in the article on the price of a Google Ads click, trade by trade.

To compare with another trade of planned jobs, see what a client costs a landscaper, and for a tradesperson who lives by emergencies instead, the roofer's numbers.

Masons pay an almost identical click, but their trade has its own traps, starting with a French spelling that matches the town of Macon: see what a client costs a mason.

My advice to start: one area, two separate campaigns, fittings on one side, windows on the other, chains excluded from day one, and a page full of your work. In two months, you'll know which of your two trades Google pays best. If you want a tool to watch the account while you're in the workshop, Pulzeo's plans are on the pricing page.

Common questions

How much should a carpenter in France bid on Google Ads?

Across ten carpentry queries pulled on November 4, 2026 from Keyword Planner, location France, the Top of page bid range has a median low end of €1.02 and a median high end of €3.79. The word “carpenter” alone tops out at €3.31. Everything changes once the request gets specific: “window replacement” climbs to €9.72 and “carpenter quote” to €10.69.

Why do window queries cost more than the word carpenter?

Because the carpenter isn't alone there. On windows, a carpenter also runs into manufacturers, installer networks and lead generation platforms that buy the same searches with much bigger budgets, while on wardrobes or staircases they mostly meet other tradespeople. On November 4, 2026, “window carpenter” had a high bid of €7.50, “custom carpenter” €3.91.

What monthly budget should a carpenter in France start with on Google Ads?

Start from the number of jobs you want. In interior fittings, with a €3 click, one quote request for every ten clicks and one quote in three signed, four jobs a month take about 120 clicks, or €360. The same goal on window installation, with an €8 click, gets close to €960. Plan for more in March and September, the two demand peaks seen in 2026.

Should a carpenter bid on the names of carpentry chains?

No. “mr menuiserie”, with its variant “mister menuisier”, gets 12,100 searches a month and “la boutique du menuisier” 5,400 times: these people are looking for a specific chain, not a tradesperson. Add those names as negative keywords as soon as you open the account, otherwise a broad match keyword will make you pay for clicks that will never turn into quotes.

Alexis
Alexis · Founder of PulzeoWith more than 20 years spent running ad campaigns, I help businesses steer their accounts toward the best results, while spending as little time on them as possible.

Keep reading